Crown separator - for soft alloys, all-ceramics and zirconia
The crown separator is one of the most important instruments in the dental practice today.
The large number of different restorative materials places an equally large number of different demands on the crown separator.
Problem-free separation of crowns and bridges
Fast, problem-free and, last but not least, economical separation of crowns and bridges requires high-quality instruments that are specially adapted to the properties of the restorative materials in order to make removal particularly efficient.
The quality of MEISINGER crown separators: stability, cutting performance, durability
MEISINGER therefore offers the optimum crown cutter for every material. All instruments are specialists in their respective field of application and impress with their high stability, excellent cutting performance and durability.
Black Cobra carbide drill bit cylinder round FG, HMB21R
Crown separator with diamond teeth Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
Variant
Black Cobra Diamant FG, B850
Figure:
B850
|
Shank:
FG
|
Size:
014
Diamond crown separator Recommended for the following materials: For extremely hard all-ceramics and zirconia
Quantity per package: 5
Variant
Black Cobra Diamant FG, B852
Figure:
B852
|
Shank:
FG
|
Size:
016
Diamond crown separator Recommended for the following materials: For extremely hard all-ceramics and zirconia
Quantity per package: 5
Crown separator, HM18CR
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
Variant
Tip
Diamant für Zirkon, FG, Z0818
Figure:
Z0818
|
Shank:
FG
|
Size:
050
Zircon Cut diamond zirconia crown cutter
Recommended for the following materials: Zirconium crowns and ceramic restorations
The new high-performance diamond discs from MEISINGER are especially suitable for cutting zirconium crowns and ceramic restorations. Depending on the indication, both a medium grit and a coarse grit are available. Due to the different sizes, the depth of the cut can be determined in advance and enables controlled work.
Speeds
Recommended speed: 80,000 min-1Maximum speed: 150,000 min-1
When using the instrument, ensure sufficient water cooling and work with low contact pressure.
Application video Zircon Cut diamond (zirconia crown cutter):
Quantity per package: 2
Diamond for zirconium medium, FG, Z838L
Diamond crown separator Recommended for the following materials: For extremely hard all-ceramics and zirconia
Quantity per package: 5
HM crown separator cross cut FG, HM31CL
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
HM crown separator cross cut FG, HM33C
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
HM crown separator cross serrated FG, HMG23RX
Crown separator with cross serration
Recommended for the following materials: Soft precious metal alloys
Crown separators with cross serration
Recommended for the following materials: Soft precious metal alloys
Quantity per package: 5
HM crown separator cross-toothed FG, HM23RX
Crown separator with cross serration
Recommended for the following materials: Soft precious metal alloys
Quantity per package: 5
HM crown separator cross-toothed FG, HM7RX
Crown separator with diamond teeth
Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
HM crown separator cross-toothed FG, HMG21RX
Crown separator with cross serration
Recommended for the following materials: Soft precious metal alloys
Quantity per package: 5
HM crown separator FG, HM4CXL
Crown separator with diamond teeth
Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
HM crown separator FG, HM4CXXL
Crown separator with diamond teeth
Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
HM crown separator FG, HMG34RS
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
HM crown separator FG, HMG35RS
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
HM crown separator FG, HMG37RS
Crown cutters with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
Variant
HM Kronentrenner Amalgamentferner Querhieb, HM31C
Figure:
HM31C
|
Shank:
RA
|
Size:
012
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
Variant
HM Kronentrenner FG, HM4C
Figure:
HM4C
|
Shank:
FG
|
Size:
012
Crown separator with diamond teeth
Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
Variant
HM Kronentrenner FG, HM4CL
Figure:
HM4CL
|
Shank:
FG
|
Size:
010
Crown separator with diamond teeth
Recommended for the following materials: For particularly hard metals, non-precious alloys and veneering ceramics
Quantity per package: 5
Variant
HM Kronentrenner kreuzverzahnt FG, HM21RX
Figure:
HM21RX
|
Shank:
FG
|
Size:
010
Crown separator with cross serration
Recommended for the following materials: Soft precious metal alloys
Quantity per package: 5
Variant
HM Kronentrenner, HM36R
Figure:
HM36R
|
Shank:
FG
|
Size:
012
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
Variant
HM Kronentrenner, Querhieb, FG, HM17
Figure:
HM17
|
Shank:
FG
|
Size:
010
Crown cutter with cross-cut teeth
Recommended for the following materials: For harder precious metal alloys and non-precious metal alloys
Quantity per package: 5
Variant
Kronentrenner, HM21CX
Figure:
HM21CX
|
Shank:
FG
|
Size:
010
Crown separator with cross serration Recommended for the following materials: Soft precious metal alloys
Quantity per package: 5