Alignment
For correct alignment in the model, you will find a dot on the buccal side of the myteeth.
Opening of the screw channel
Open the screw channel with the original Phillips screwdriver. Place the tip in the centre of the tooth root.
Fasten the screw
When the myteeth is attached to the model, it can be carefully screwed in. The original screw should only be tightened by hand.
We recommend that you tighten the screw a little and then unscrew it to remove the material inside.
For ANKA-4 models, the screw should protrude approximately 1 - 1.5 mm and not be screwed completely into the myteeth.
